Menu

Accessible Entry System with Color Video Camera

Model: AES-2005S

  • Built-in high resolution color video camera with wide viewing angle, tilt / swivel adjustments and wide operating temperature
  • 16 position, back-lit display with 0.5″ tall characters
  • Non-volatile digital voice announcer
  • Supports up to 525 tenant names and phone numbers
  • Voice announce 75 names (expandable to 525 names using ERAM-4M expansion kits, DOD 854)
  • Non-volatile data memory for names, phone numbers and access codes
  • Volume control
  • AES-NET card reader interface included
  • TTY jack for connection to personal teletypewriter (TTY)
  • Postal lock switch input
  • Keyless entry capability
  • 5 Amp door strike / magnetic lock control relays
  • Vandal resistant features:
    • 12 gauge stainless steel front panel
    • 0.25″ thick abrasion resistant polycarbonate display lens
    • Metal keypad and push button switches
    • Front panel lock
    • Speaker protection screen
  • Weather resistant features:
    • Enamel coated circuit board
    • Gasketing behind lens, speaker, keypad and perimeter of front panel
    • Sealed switches and keypad
View all features

Questions?

We are here to help!

Product Details

The AES-2005S Accessible Entry System provides both audio and visual assistance for those with disabilities, two-way handsfree audio communication, and color composite video of who is at your door or gate entrance.

The LCD display with large 0.5″ tall characters is back-lit and will display a directory of tenants as well as directions and prompts. A built-in voice recorder and announcer can also provide a supporting audio message. When the EZ Access button is pressed, instructions on how to use the system are both displayed and announced.

The built-in directory can support up to 525 tenant names and phone numbers and will dial a pre-programmed phone number upon selection of a tenant. Once two-way communication has been established, the tenant can activate a remote door strike by entering a touch tone command. A second relay is also provided to operate an automatic door. The AES-2005S will also support keyless door entry at the door via its built-in keypad, or add a Viking Proximity Reader.

The unit is available in flush mount (AES-2005F) and surface mount (AES-2005S) configurations and features a highly vandal resistant housing.

Note: This unit requires a Viking PB-100 for programming and because it uses modem transmissions, it requires a high quality analog phone line for proper operation.

AES-2005S Access Control Phone Entry System with surface mount box

Applications

  • High rise apartment buildings
  • Condos
  • Senior citizen buildings
  • Assisted care centers
  • Retirement homes
  • Gated communities
  • Use with Viking proximity readers

Features

  • Built-in high resolution color video camera with wide viewing angle, tilt / swivel adjustments and wide operating temperature
  • 16 position, back-lit display with 0.5″ tall characters
  • Non-volatile digital voice announcer
  • Supports up to 525 tenant names and phone numbers
  • Voice announce 75 names (expandable to 525 names using ERAM-4M expansion kits, DOD 854)
  • Non-volatile data memory for names, phone numbers and access codes
  • Volume control
  • AES-NET card reader interface included
  • TTY jack for connection to personal teletypewriter (TTY)
  • Postal lock switch input
  • Keyless entry capability
  • 5 Amp door strike / magnetic lock control relays
  • Vandal resistant features:
    • 12 gauge stainless steel front panel
    • 0.25″ thick abrasion resistant polycarbonate display lens
    • Metal keypad and push button switches
    • Front panel lock
    • Speaker protection screen
  • Weather resistant features:
    • Enamel coated circuit board
    • Gasketing behind lens, speaker, keypad and perimeter of front panel
    • Sealed switches and keypad

Certifications

  • FCC Part 68
  • FCC Part 15

Specifications

  • AES-2005S Power: 120VAC / 13.8VAC 1.25A UL listed adapter provided
  • Camera Power: 120VAC / 12VDC 500mA UL listed adapter provided or 6-22VDC 150mA
  • Dimensions: 12.26″ x 9.66″ x 4.25″ (311.4mm x 245.36mm x 107.9mm)
  • Shipping Weight: 17 lbs (7.7 kg)
  • Operating Temperature: -15°F to 130°F (-26°C to 54°C)
  • Humidity: 5% to 95% non-condensing
  • Display: 16 position, 0.5″ x 4.25″ back-lit LCD
  • SPDT Relay Contact Rating: 5A @ 30VDC / 5A @ 250VAC, 250VAC maximum
  • Image Sensor: 1/4″ color CMOS
  • Video Output: 1VP-P composite, NTSC, 75 Ohms
  • Resolution: 420 lines (640 x 480 @ 30fps / 307,200 pixels)
  • Sensitivity: 0.025 LUX (50 IRE) F1.2 3200K
  • Lens: 2.1mm, conical pinhole
  • Field of View: 80° Horizontal, 60° Vertical, 100° Diagonal
  • Tilt / Swivel Adjustment: Vertical +/- 20°, horizontal +/- 30°
  • Connections: (20) cage clamp screw terminals, 3 gel-filled butt connectors (3M Scotchlok UR2)


Questions?

We are here for you!

Contact Us