Push-to-Talk Phone

Model: E-30-PT

Push to talk button
Vandal Resistant Features:
- 14 Gauge louvered 316 brushed stainless steel faceplate with permanent laser etched graphics
- Speaker / mic screen
- Heavy duty metal “Call” button
- T-10 Torx security mounting screws and drive bit
Weather Resistant Features:
- Marine grade 316 stainless steel faceplate, screws and push button switch
- Switch internally sealed per IP67
- Mylar speaker
- Self draining mic mount
Volume adjustments for microphone and speaker
Telephone line powered
Non-volatile memory, no batteries required
Blue off-hook LED indicator
Dials up to 5 emergency numbers
Cycles through backup phone numbers on busy or ring-no-answer
Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command
Selectable auto-answer feature for monitoring
Extended temperature range (-15°F to 130°F)
Flush mount using the included rough-in box or surface mount using a Viking VE-5×5 Surface Mount Box (DOD 424)

View all features

Add to Pick List Added to Pick List

Software & Downloads

Product Manual

1600A Series & E-30 Telephone Line Specifications

Facebook Tweet Pin LinkedIn Email

Questions?

We are here to help!

Product Details

The E-30-PT is a door entry phone designed to provide quick and reliable communication in noisier areas. The mic sensitivity is set to a low level until the TALK button is pressed then it is raised to a normal level. In this way, the E-30-PT assures that the called party’s voice will be broadcast over the speaker. In applications where the background noise can be louder than the person calling, a handset type phone is recommended.

The E-30-PT features non-volatile memory, a built-in dialer, and intelligent call progress detection for automatic hang-up when the call is completed. The E-30-PT can be programmed to dial up to 5 different numbers on ring no answer or busy and can be configured to dial these numbers until answered.

For outdoor installations where the unit is exposed to precipitation or condensation, use model E-30-PT-EWP. For more information on Enhanced Weather Protection (EWP), see DOD 859.

Applications

Non-ADA Hot-Line Phones for:
- Terminals
- Parking lots / ramps
- Stadiums
- Convention centers
- ATM machines
Gate and Door Entry Phones for:
- Business lobbies
- Residences
- Vehicular and Pedestrian gates

Features

Push to talk button
Vandal Resistant Features:
- 14 Gauge louvered 316 brushed stainless steel faceplate with permanent laser etched graphics
- Speaker / mic screen
- Heavy duty metal “Call” button
- T-10 Torx security mounting screws and drive bit
Weather Resistant Features:
- Marine grade 316 stainless steel faceplate, screws and push button switch
- Switch internally sealed per IP67
- Mylar speaker
- Self draining mic mount
Volume adjustments for microphone and speaker
Telephone line powered
Non-volatile memory, no batteries required
Blue off-hook LED indicator
Dials up to 5 emergency numbers
Cycles through backup phone numbers on busy or ring-no-answer
Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command
Selectable auto-answer feature for monitoring
Extended temperature range (-15°F to 130°F)
Flush mount using the included rough-in box or surface mount using a Viking VE-5×5 Surface Mount Box (DOD 424)

Certifications

FCC Part 68
FCC Part 15

Specifications

REN 0.5A
Power	Telephone line powered (24VDC / 20mA minimum)
Overall Dimensions	5″ x 5″ x 2.25″ (127mm x 127mm x 57mm)
Plastic Electrical Box	4″ x 4″ x 2.12″ (102mm x 102mm x 54mm)
Shipping Weight	2.2 lbs (1 kg)
Operating Temperature	-15°F to 130°F (-26°C to 54°C)
Humidity	5% to 95% non-condensing
Material	14 gauge 316 stainless steel with #4 brushed finish
Minimum Ring Voltage	25VRMS
Connections	(2) gel-filled butt connectors