VoIP Entry Phone with Color Video Camera and Enhanced Weather Protection

Model: E-35-IP-EWP

Built-In high resolution analog NTSC color video camera with wide viewing angle, tilt / swivel adjustments and wide operating temperature
2 Amp relay contacts for door / gate or SL-2 Strobe Light (DOD 242) control
Blue Call Connected” LED indicator
SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 Watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
VoIP audio detection eliminates the need for “Push to Talk” mode
Handsfree operation
T-10 Torx security screws for added security
Laser etched graphics
Programmable to dial up to 5 numbers
Cycles through backup phone numbers on busy or ring-no-answer
Hangs up on busy signal, time-out or touch tone command
Programming software included
Network downloadable firmware
Remotely programmable
Diagnostics for testing mic, speaker, and relay
Flush mounts using the included rough-in box or surface mount using a Viking VE-5X5 Surface Mount Box (DOD 424)
Extended temperature range: -40°F to 140°F (-40°C to 60°C)
Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859

“

View all features

Add to Pick List Added to Pick List

Software & Downloads

Product Manual

Quick Start Guide

IP Programming Software

E-IP Series Touch Tone Programming

VoIP SIP System Compatibility List

EWP = Enhanced Weather Protection

Facebook Tweet Pin LinkedIn Email

Questions?

We are here to help!

Product Details

The E-35-IP-EWP VoIP Entry Phone is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE and has a color video camera. The E-35-IP-EWP VoIP Entry Phone can be programmed from any touch tone phone, a PC on the same LAN, or remotely using a static IP address. The entry phone can dial up to 5 programmable numbers. On-board 2 Amp relay contacts are provided for activating doorstrikes or gate controllers. An optional RC-4A Secure Relay Controller can also be used. The E-35-IP-EWP Entry Phone will flash the “Call” LED during dialing and automatically light the LED when the call is answered. All programming parameters, including phone numbers, are stored in non-volatile memory, requiring no batteries. The unit is PoE powered.

For outdoor installations where the unit is exposed to precipitation or condensation, model E-35-IP-EWP is equipped with Enhanced Weather Protection (EWP). EWP products feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards. For more information, see DOD 859.

Applications

Gate Entrance
Parking ramps / lots
ATM machines
Medical centers
Lobbies
Entryways
Stadiums
Convention centers
Public access areas

Features

Built-In high resolution analog NTSC color video camera with wide viewing angle, tilt / swivel adjustments and wide operating temperature
2 Amp relay contacts for door / gate or SL-2 Strobe Light (DOD 242) control
Blue Call Connected” LED indicator
SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 Watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
VoIP audio detection eliminates the need for “Push to Talk” mode
Handsfree operation
T-10 Torx security screws for added security
Laser etched graphics
Programmable to dial up to 5 numbers
Cycles through backup phone numbers on busy or ring-no-answer
Hangs up on busy signal, time-out or touch tone command
Programming software included
Network downloadable firmware
Remotely programmable
Diagnostics for testing mic, speaker, and relay
Flush mounts using the included rough-in box or surface mount using a Viking VE-5X5 Surface Mount Box (DOD 424)
Extended temperature range: -40°F to 140°F (-40°C to 60°C)
Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859

“

Certifications

EWP
IP66
CE
Canada ICES
SIP

Specifications

Power: PoE class 1 (<4 Watts)
Camera Power: 120VAC / 12VDC 500mA UL listed adapter provided or 6-22VDC 150mA
Maximum Sound Pressure: 90dB SPL @ 1m
Overall Dimensions: 5.0″ x 5.0″ x 2.25″ (127mm x 127mm x 57mm)
Plastic Electrical Box: 4″ x 4″ x 2.12″ (102mm x 102mm x 54mm)
Shipping Weight: 2.1 lbs (1.0 kg)
Operating Temperature: -40°F to 140°F (-40°C to 60°C)
Humidity: Up to 100%
Material: 14 gauge 316 stainless steel with #4 brushed finish
SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Image Sensor: 1/4″ color CMOS
Video Output: 1VP-P composite, NTSC, 75 Ohms
Resolution: 420 lines (640 x 480 @ 30fps / 307,200 pixels)
Sensitivity: 0.025 LUX (50 IRE) F1.2 3200K
Lens: 2.1mm, conical pinhole
Field of View: 80° Horizontal, 60° Vertical, 100° Diagonal
Tilt / Swivel Adjustment: Vertical +/- 20°, horizontal +/- 30°
Connections: (1) RJ45 10/100 Base-T, (6) gel-filled butt connectors (3M Scotchlok UR2)