Menu

Single Gang Entry Phone, White Finish

Model: E-40-WH

  • Compact size – Front panel is the size of a typical single gang mid-size wall plate
  • Mounting:
    • Flush mounts in a single gang electrical box (2.25″ deep x 2.00″ wide x 2.84″ tall minimum)
    • Surface mounts in a Viking model VE-3X5 (not included, see DOD 424) for mounting on a wall, post or VE-GNP
    • Gooseneck Pedestal (E-40-WH-EWP recommended)
  • Vandal Resistant Features:
    • 18 gauge 304 stainless steel faceplate
    • 316 stainless steel push button
    • fiberglass reinforced plastic speaker screen
    • scratch resistant powder coating
    • hex drive mounting screws
  • Weather Resistant Features:
    • Mylar speaker
    • faceplate gasket
    • mic and speaker gasket
    • internally sealed (IP67) push button switch
    • self draining mic mount
    • UV stable weather resistant powder coating
  • Telephone line powered
  • Microphone and speaker volume controls
  • Programmable intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
  • Selectable auto answer feature for monitoring
  • Programmable VOX (mic/speaker) switching speed
  • Blue LED helps locate push button, indicate ringing and off hook
View all features
Add to Pick List Added to Pick List
Software & Downloads

Product Manual

Questions?

We are here to help!

Product Details

The E-40-WH door entry phone is a compact, weather and vandal resistant, telephone line powered speaker phone designed to provide two-way handsfree audio communication. The E-40-WH’s compact size allows it to be mounted in a standard single gang electrical box. The E-40-WH’s blue LED continually provides light for locating the push button in dark locations, dims to indicate off hook and flashes during incoming calls.

The E-40-WH entry phone can share a single phone line with house or small business telephones when used with a Viking C-200, C-250, C-500 or C-2000B Entry Phone controller. The E-40-WH entry phone can also be connected to an unused analog station port (programmed for ringdown) on a phone system or connected directly to a telephone line when used with a Viking K-1900-5 or K-1900-30 auto dialer. The E-40-WH features microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed.

Replacement faceplates (PNL40-WH) can be purchased separately.

For outdoor installations where the unit is exposed to precipitation or condensation, use model E-40-WH-EWP. For more information on Enhanced Weather Protection (EWP), see DOD 859.

single gang white door entry phone

Applications

  • Door or gate communication, business delivery entrances
  • Use with a Viking C-200 or C-250 to control one unit on a single line
  • Use with a Viking C-500 to control 1 or 2 (expandable to 8) units and door/gate control on a single phone line
  • Use with a Viking C-2000B to control 1 to 4 units and door/gate control on a single phone line
  • Provide unique front and back door chimes and paging when used with a Viking SLP-1, SLP-4 and C-2000B
  • Residential, commercial and industrial door security
  • Use with a Viking K-1900-5 or K-1900-30 for automatic speed dialing on telephone lines or analog PABX/KSU station ports
  • Use on any analog PABX station port with programmable ringdown capability

Features

  • Compact size – Front panel is the size of a typical single gang mid-size wall plate
  • Mounting:
    • Flush mounts in a single gang electrical box (2.25″ deep x 2.00″ wide x 2.84″ tall minimum)
    • Surface mounts in a Viking model VE-3X5 (not included, see DOD 424) for mounting on a wall, post or VE-GNP
    • Gooseneck Pedestal (E-40-WH-EWP recommended)
  • Vandal Resistant Features:
    • 18 gauge 304 stainless steel faceplate
    • 316 stainless steel push button
    • fiberglass reinforced plastic speaker screen
    • scratch resistant powder coating
    • hex drive mounting screws
  • Weather Resistant Features:
    • Mylar speaker
    • faceplate gasket
    • mic and speaker gasket
    • internally sealed (IP67) push button switch
    • self draining mic mount
    • UV stable weather resistant powder coating
  • Telephone line powered
  • Microphone and speaker volume controls
  • Programmable intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
  • Selectable auto answer feature for monitoring
  • Programmable VOX (mic/speaker) switching speed
  • Blue LED helps locate push button, indicate ringing and off hook

Certifications

  • FCC Part 68
  • FCC Part 15

Specifications

  • Power: Telephone line powered (24VDC / 20mA minimum)
  • Faceplate Dimensions: 4.875″ x 3.125″ x 0.18″ (123.8mm x 79.4mm x 4.6mm)
  • Phone Dimensions: 2.84″ x 1.8″ x 1.65″ (72mm x 46mm x 42mm)
  • Shipping Weight: 1.0 lbs (0.45 kg)
  • Operating Temperature: -30° F to 150° F (-34° C to 65° C)
  • Humidity: 5% to 95% non-condensing humidity
  • Material: 18 gauge 304 stainless steel faceplate
  • Finish: UV stable satin white powder paint
  • Speaker Volume: Approximately 62db maximum @ 1m
  • Ring Voltage: 25V AC RMS minimum (for auto answer)
  • CPC Disconnect Time: 300ms minimum
  • REN: 0.8A
  • Connections: (2) gel-filled butt connectors


Questions?

We are here for you!

Contact Us