HUDSON, WI – June 12, 2020 – Economical and dynamic – the 30AE- 70V ceiling speaker for 70-Volt and 25-Volt paging systems distributes sound evenly, accurately, and affordably. “The 30AE-70V efficiently produces high quality audio and is a great addition to Viking’s paging collection.” – Paul Speltz, Senior Engineer, Viking Electronics, Inc. Viking’s new 30AE-70V ceiling […]
HUDSON, WI – May 15, 2020 – Economical and effective – the 25AE- 70V paging horn for 70-Volt and 25-Volt paging systems distributes sound evenly, accurately, and affordably. “The 25AE-70V efficiently produces high quality audio and is a great addition to Viking’s paging collection.” – Paul Speltz, Senior Engineer, Viking Electronics Viking’s new 25AE-70V paging horn […]
392kb
627kb
Convert any 8 Ohm, 25V or 70V Analog Paging Speaker to an IP Speaker with Talk-Back
[…] Viking quality to this large of a scale.” – Paul Speltz, Sr. Engineer, Viking Electronics The PA-250 is a 250-Watt rack mounted paging amplifier for 25V and 70V paging speakers or horns. Easily initiate a voice page using an FXS or FXO port, a 600 Ohm Paging port or a microphone with push to […]
[…] paging amplifier is unique in it’s usability and efficiency.” – Paul Speltz, Engineer, Viking Electronics The PA-250-IP is a 250-Watt rack mounted paging amplifier for 25V and 70V paging speakers and horns. Initiate voice paging with the PA-250-IP as a Unicast end point or add the PA-250-IP to a paging group for Multicast paging. […]
[…] Senior Engineer, Viking Electronics The PP-250 is a rack mounted paging amplifier that provides 250 Watts of paging power. The unit is compatible with both 25V and 70V paging speakers. The high efficiency amplifier technology reduces heat dissipation allowing for smaller chassis size, increased reliability, and lower cost. A 600 Ohm input on the […]
[…] all 300AE horns ship with weather resistant features. The included mounting hardware is fully adjustable to fit into those tight rafter spaces. When used with 25V or 70V amplifiers, the 300AE has an on-board rotary switch that allows the installer to adjust each horn’s volume independently of the next horn. The 300AE has a […]
[…] Watt of paging power to each speaker. Installation is easy! Simply mount the PSA-IP magnetically to the back of an analog speaker magnet or to the 25/ 70V transformer mounting holes on the speaker frame using the included mounting screws. The PSA-IP’s speaker output connects to the input of the speaker. Connect the PSA-IP […]
[…] the PSA-TB-IP magnetically to the back of an analog speaker magnet or use the included screws to attach the unit to the speaker frame using the 25/ 70V transformer mounting holes. Connect the speaker output of PSA-TB-IP to the input of the paging speaker. Then connect the PSA-TB-IP to an open port on a […]
Spare Parts Store
Where to Buy
My Pick List
Service & Support
