HUDSON, WI – January 23, 2018 – The RAD-1A remote access device connects existing paging systems with today’s most common analog interfaces.

“There’s no standard way to page anymore. Advancements in VoIP/SIP and cellular technologies can leave applications wide open, so we made a simple interface to bridge the gap.” – James Catt, Engineer, Viking Electronics, Inc.

The RAD-1A allows users to bring their existing paging system into the modern realm of VoIP/SIP and mobile telecom applications. The RAD-1A is a ring-trip paging device that will answer an incoming phone call and convert that audio into a 600 Ohm output compatible with the majority of paging amplifiers in use today. An optional security code prevents misdials or unauthorized access of your paging system.

A multitude of analog phone line emulators are compatible with the RAD-1A. Cellular-to-analog adapters may be used, or use an FXS port on an ATA to connect hosted and on-premise VoIP/SIP phone systems. CO lines and analog PABX extensions can also be used.

Once a user connects with the RAD-1A, on-board relay contacts can activate the attached paging amplifiers. After the page, the RAD-1A will disconnect on CPC, busy signal, or return to dial tone. User-programmable silence time-out or call-length time out will also trigger a disconnect once the timer has expired.

For more information on the RAD-1A, visit: https://vikingelectronics.com/products/rad-1a/

Viking Electronics designs and manufactures over 500 communication and security products, including VoIP and analog emergency phones, entry systems, paging interfaces, paging amplifiers, mass notification systems, hot line products, and enclosures. Many Viking products are designed to fix or add unique features to telephone or security applications, keeping costs down while maintaining ease of use. All Viking products are designed, manufactured, supported here in the USA, and are backed by a two year limited warranty. For more information, please visit: vikingelec17.wpengine.com