Menu

3 Channel Digital Voice Announcer

Model: DVA-1003B

  • 1 minute of record time per channel
  • Remotely recordable
  • Locally recordable using a standard carbon handset or tape player
  • Selectable ring delay per channel
  • Detects CPC signal and disconnects
  • Callers may be transferred after the announcement
  • Messages stored in non-volatile memory, no batteries required
  • Recording volume LED indicator for consistently high-quality recordings
  • Recognizes handshake signals from virtually any PABX, Centrex, or CO line
  • Programmable to repeat announcement
  • Designed to mount in a standard 19″ rack
View all features
Add to Pick List Added to Pick List

Product Details

The DVA-1003B is a professional and cost-effective three port digital voice announcer specifically designed for ACD / UCD, auto-attendant, intercept, night message, and information provider applications, as well as other PABX and Centrex announcement functions.

The DVA-1003B will increase call handling capacity by answering on demand after the programmed ring delay or during the first ring, and automatically adjusting the announce cycle to the message length. The DVA-1003B disconnects on CPC and is instantly ready for the next caller.

The DVA-1003B has 1 minute of non-volatile record time per channel.

Applications

  • ACD / UCD announcements
  • Intercept announcement
  • Announce-only applications
  • School closings
  • Ski reports
  • Night answer
  • Wake-up calls
  • Bank rates / commodity prices
  • Any application where information must be repeated continuously and may require frequent updating
  • Replace existing tape and drum recorders

Features

  • 1 minute of record time per channel
  • Remotely recordable
  • Locally recordable using a standard carbon handset or tape player
  • Selectable ring delay per channel
  • Detects CPC signal and disconnects
  • Callers may be transferred after the announcement
  • Messages stored in non-volatile memory, no batteries required
  • Recording volume LED indicator for consistently high-quality recordings
  • Recognizes handshake signals from virtually any PABX, Centrex, or CO line
  • Programmable to repeat announcement
  • Designed to mount in a standard 19″ rack

Certifications

  • FCC Part 68
  • FCC Part 15

Specifications

  • Power: 120VAC / 12VDC 500mA UL listed adapter provided or -24 to -58VDC @ 100mA maximum
  • Dimensions: 19.0″ x 1.75″ x 5.0″ (483mm x 44mm x 127mm)
  • Shipping Weight: 7 lbs (3 kg)
  • Temperature: 32°F to 90°F (0°C to 32°C)
  • Humidity: 5% to 95% non-condensing
  • Message Length: 1 minute per channel
  • Sampling Rate: 64K (equivalent)
  • Connections: (3) RJ11 jacks, (3) 4-wire E&M jacks, (3) 3.5mm (1/8″) audio jacks, (3) handset jacks, (2) screw terminals

Compare With Similar Items

  • Power: 120VAC / 12VDC 500mA UL listed adapter provided
  • Dimensions: 5.25″ x 3.5″ x 1.75″ (133mm x 89mm x 44mm)
  • Shipping Weight: 2.2 lbs (1.0 kg)
  • Temperature: 32°F to 90°F (0°C to 32°C)
  • Humidity: 5% to 95% non-condensing
  • Frequency Response: 100Hz – 3.4KHz
  • Sampling Rate: 64K (equivalent)
  • Maximum Message Length: 7.5 minutes
  • Recording Audio Input Level: 30mV – 1.0V RMS (AGC range)
  • Maximum Audio Output Level: 0.3V RMS (across a 600 Ohm load)
  • Speaker Output Power: 2 Watt peak
  • Pre-recorded Pacifier Message Length: 30 seconds total
  • Minimum Speaker Impedance: 2.66 Ohms: (3) 8-Ohm speakers in parallel
  • Maximum I.O. Com Wire Run Length: 1000 ft on 24 AWG
  • Maximum Remote Trigger Wire Run Length: 4000 ft on 24 AWG
  • Connections: (6) cage clamp screw terminals, (3) 3.5mm audio jacks, (1) handset jack
  • Power: 120VAC / 12VDC 500mA UL listed adapter provided
  • Dimensions: 5″ x 5″ x 1.5″ (127mm x 127mm x 38mm)
  • Shipping Weight: 2.5lbs (1.13 kg)
  • Temperature: 32°F to 90°F (0°C to 32°C)
  • Humidity: 5% to 95% non-condensing
  • Message Length: Up to 1 minute
  • Sampling Rate: 64K (equivalent)
  • Connections: (1) RJ11, (1) 4-wire E&M, (1) 3.5mm audio jack, (1) handset jack
  • Power: 120VAC / 12VDC 500mA UL listed adapter provided or -48VDC 100mA maximum
  • Dimensions: 19″ x 1.75″ x 8″ (483mm x 44mm x 203mm)
  • Shipping Weight: 7 lbs (3 kg)
  • Temperature: 32°F to 90°F (0°C to 32°C)
  • Humidity: 5% to 95% non-condensing
  • Message Length: 1 minute per channel, field expandable
  • Sampling Rate: 64K (equivalent)
  • Interfaces: Standard ring-trip with adjustable ring delay, 4-wire E&M with 600 Ohm audio and switch selectable protocol
  • Connections: (4) RJ11 jacks, (3) 4-wire E&M jacks, (1) 3.5mm (1/8″) audio jack, (1) handset jack, (8) screw terminals