Menu

VoIP Emergency Tower Phone with Two Buttons and Enhanced Weather Protection (EWP)

Model: E-1600BLT2IPEWP

  • Automatic polling and programming software included
  • SIP compatible
  • Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
  • PoE powered (class 1, <4 Watts)
  • Automatic Noise Canceling (ANC) for operation in noisy environments
  • VoIP eliminates the need for “Push to Talk” mode
  • Network downloadable firmware
  • Meets ADA requirements for Emergency Phones:
    • Automatically lights the “Call Connected” LED
    • Transmits a location I.D. or voice announcement
    • Grade 2 Braille label for the visually impaired
  • Non-volatile digital voice announcer with 28 seconds of voice memory
  • Handsfree operation
  • Marine grade 316 stainless steel prevents faceplate / push button corrosion
  • Dials up to 5 emergency numbers
  • Can also dial 5 non-emergency “INFO” numbers
  • Cycles through backup phone numbers on busy or no-answer
  • Comes standard with Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
  • Hangs up on busy signal, time-out or touch tone command
  • Remotely programmable
  • Extended temperature range of -40°F to 140°F
  • Optional PB-100 Polling System available (DOD 232)
  • Diagnostics for testing microphone, speaker, and relay
View all features

Questions?

We are here to help!

Viking Electronics

Product Details

The E-1600BLT2IPEWP is an ADA Compliant VoIP Emergency Tower Phone designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The tower phone meets ADA requirements for emergency telephones, and can be programmed from any touch tone phone or PC on the same LAN or remotely using a static IP address. The “HELP” button can dial up to 5 programmable emergency numbers, and the “INFO” button can dial up to 5 non-emergency numbers.

At the simple push of a button, the Tower Phone will initiate a call to your emergency personnel and send a digital announcement to identify the location of the emergency call. In addition, the tower phone’s bright LED strobe light will instantly begin flashing to deter further activity and make it fast and easy for Police or Security personnel to locate the site of the emergency. The strobe light can also be programmed to provide a continuous-on lower intensity beacon when the emergency phone is not in use.

The E-1600BLT2IPEWP emergency tower phone is equipped with Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or condensation. EWP products feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming. For more information on EWP, see DOD 859.

2 button voip emergency tower phone with ewp

Applications

  • Campus Auditoriums
  • Parking Ramps / Lots
  • Automated Tellers (ATM)
  • Entryways
  • Stairwells in Public Buildings

Features

  • Automatic polling and programming software included
  • SIP compatible
  • Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
  • PoE powered (class 1, <4 Watts)
  • Automatic Noise Canceling (ANC) for operation in noisy environments
  • VoIP eliminates the need for “Push to Talk” mode
  • Network downloadable firmware
  • Meets ADA requirements for Emergency Phones:
    • Automatically lights the “Call Connected” LED
    • Transmits a location I.D. or voice announcement
    • Grade 2 Braille label for the visually impaired
  • Non-volatile digital voice announcer with 28 seconds of voice memory
  • Handsfree operation
  • Marine grade 316 stainless steel prevents faceplate / push button corrosion
  • Dials up to 5 emergency numbers
  • Can also dial 5 non-emergency “INFO” numbers
  • Cycles through backup phone numbers on busy or no-answer
  • Comes standard with Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
  • Hangs up on busy signal, time-out or touch tone command
  • Remotely programmable
  • Extended temperature range of -40°F to 140°F
  • Optional PB-100 Polling System available (DOD 232)
  • Diagnostics for testing microphone, speaker, and relay

Certifications

  • EWP
  • IP66
  • FCC Part 15
  • ADA
  • SIP

Specifications

Phone Power PoE class 1 (<4 Watts)
Beacon/Strobe Power 120VAC / 12VDC power adapter (included)
Maximum Sound Pressure 90 dB SPL @ 1m
Dimensions 42” x 6” x 4.5” (107.0 cm x 15.24 cm x 10.93 cm)
Shipping Weight 20 lbs (9.1 kg)
Mounting Surface mount to rigid wall or post
Operating Temperature -40°F to 140°F (-40° C to 60° C)
Humidity Up to 100%
Audio Codecs G711u, G711a, G722
Network Compliance IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Connections (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

Compare With Similar Items

  • Phone Power: PoE class 1 (<4 Watts)
  • Beacon/Strobe Power: 120VAC / 12VDC power adapter (included)
  • Maximum Sound Pressure: 90 dB SPL @ 1m
  • Dimensions: 42” x 6” x 4.5” (107.0 cm x 15.24 cm x 10.93 cm)
  • Shipping Weight: 20 lbs (9.1 kg)
  • Mounting: Surface mount to rigid wall or post
  • Operating Temperature: -40°F to 140°F (-40° C to 60° C)
  • Humidity: Up to 100%
  • Audio Codecs: G711u, G711a, G722
  • Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
  • Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors
  • Phone Power: PoE class 1 (<4 Watts)
  • Beacon/Strobe Power: 120VAC / 12VDC power adapter (included)
  • Maximum Sound Pressure: 90 dB SPL @ 1m
  • Dimensions: 42” x 6” x 4.5” (107.0 cm x 15.24 cm x 10.93 cm)
  • Shipping Weight: 20 lbs (9.1 kg)
  • Mounting: Surface mount to rigid wall or post
  • Operating Temperature: -40°F to 140°F (-40° C to 60° C)
  • Humidity: Up to 100%
  • Audio Codecs: G711u, G711a, G722
  • Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
  • Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors
  • Phone Power: PoE class 1 (<4 Watts)
  • Beacon/Strobe Power: 120VAC / 12VDC power adapter (included)
  • Maximum Sound Pressure: 90 dB SPL @ 1m
  • Dimensions: 42” x 6” x 4.5” (107.0 cm x 15.24 cm x 10.93 cm)
  • Shipping Weight: 20 lbs (9.1 kg)
  • Mounting: Surface mount to rigid wall or post
  • Operating Temperature: -40°F to 140°F (-40° C to 60° C)
  • Humidity: Up to 100%
  • Audio Codecs: G711u, G711a, G722
  • Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
  • Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

Questions?

We are here for you!

Contact Us
Viking Electronics
Viking Electronics
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.