Touch-Free VoIP Entry Phones with EWP

Model: E-20TF-IP-EWP

Touch-free motion sensor with adjustable range from one to four inches
Motion sensors ring LED lights blue during idle, flashes green during dialing and lights steady green when call is answered
Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 Strobe Light control
SIP compliant
Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
PoE powered (class 1, <4 Watts)
Automatic Noise Canceling (ANC) for proper operation in noisy environments
VoIP eliminates the need for “Push to Talk” mode
Network downloadable firmware
T-10 Torx security screws for added security
Can be used with optional RC-4A Secure Relay Controller
Marine grade 316 stainless steel prevents corrosion on stainless steel models
Laser etched graphics on stainless steel models
Programmable to dial up to 5 numbers on busy or ring no answer
Cycles through backup phone numbers on busy or no-answer
Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range of -40°F to 140°F
Volume adjustments for microphone and speaker
Surface mounts to a wall or flat sided post
Diagnostics for testing microphone, speaker, and relay

View all features

Add to Pick List Added to Pick List

Software & Downloads

Product Manual

IP Programming Software

Facebook Tweet Pin LinkedIn Email

Questions?

We are here to help!

Product Details

The E-20TF-IP-EWP Touch-Free VoIP Entry Phone is equipped with Viking’s touchless motion sensor. A simple wave over the sensor will activate a call. Touch-free calling eliminates the exposure to germs and bacteria from typical push button switches.

The entry phone is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The unit can be programmed from any touch tone phone, PC, or remotely using a static IP address. The entry phone can dial up to 5 programmable numbers. On-board 2 Amp relay contacts are provided to activate doorstrikes or gate controllers. An optional Viking RC-4A Secure Relay Controller can also be used.

The entry phone motion sensor LED lights blue during idle, flashes green during dialing and lights solid green when the call is answered.

The E-20TF-IP-EWP is equipped with Enhanced Weather Protection (EWP), ideal for outdoor installations where the unit is exposed to precipitation or condensation. EWP products are designed to meet IP66 standards and may feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming. For more information on EWP, see DOD 859.

Applications

Gesture activated entry phone for use in high traffic areas, such as:

Gate entrance
Parking ramps/lots
ATM machines
Medical centers
Lobbies
Entryways
Stadiums
Convention centers
Public access areas

Features

Touch-free motion sensor with adjustable range from one to four inches
Motion sensors ring LED lights blue during idle, flashes green during dialing and lights steady green when call is answered
Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 Strobe Light control
SIP compliant
Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
PoE powered (class 1, <4 Watts)
Automatic Noise Canceling (ANC) for proper operation in noisy environments
VoIP eliminates the need for “Push to Talk” mode
Network downloadable firmware
T-10 Torx security screws for added security
Can be used with optional RC-4A Secure Relay Controller
Marine grade 316 stainless steel prevents corrosion on stainless steel models
Laser etched graphics on stainless steel models
Programmable to dial up to 5 numbers on busy or ring no answer
Cycles through backup phone numbers on busy or no-answer
Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range of -40°F to 140°F
Volume adjustments for microphone and speaker
Surface mounts to a wall or flat sided post
Diagnostics for testing microphone, speaker, and relay

Certifications

EWP
IP66
CE
Canada ICES
FCC Part 15
SIP

Specifications

Power: PoE class 1 (<4 watts)
Operating Temperature: -40°F to 140°F (-40° C to 60° C)
Humidity – EWP Products: Up to 100%
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Regulatory Compliance: FCC Part 15, Canada ICES-3 Class A
Maximum Sound Pressure: 90 dB SPL @ 1m
Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

Compare With Similar Items

Power: PoE class 1 (<4 watts)
Operating Temperature: -40°F to 140°F (-40° C to 60° C)
Humidity: Up to 100%
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Regulatory Compliance: FCC Part 15, Canada ICES-3 Class A, CE
Maximum Sound Pressure: 90 dB SPL @ 1m
Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors