VoIP Entry Phone System with Analog Camera and Proximity Reader, Bronze Finish

Model: K-1775-BN-IP

Built-in 125KHz 26-bit Wiegand proximity card reader with LED, beep card read confirmation, and EWP board protection
Compatible with the following Viking Proximity Cards and Fobs: PRX-C, PRX-C-ISO and PRX-FOB (DOD 198)
Built-in high resolution color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature of -30°F to 150°F
Vandal Resistant Features:
- 14 gauge louvered 316 stainless steel faceplate with scratch resistant powder coating
- Stainless steel “Call” button
- Heavy duty metal keypad
- T-10 Torx security mounting screws
Weather Resistant Features:
- Marine grade 316 stainless steel faceplate, screws and push button switch
- Switch internally sealed per IP67
- Mylar speaker
- Self-draining mic mount
- Faceplate, mic and speaker gaskets
Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
Secure Remote Relay Control using Viking RC-4A, see DOD 582
Blue “Call /Status” LED indicator
SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
PoE powered (class 2, <6.5 Watts)
Automatic Noise Canceling (ANC) feature for operation in noisy environments
Viking’s proprietary VOX switching eliminates the need for “Push to Talk” mode
Network downloadable firmware
26 Bit Wiegand input for adding a Viking proximity card reader
26 Bit Wiegand output connect to card reader input of an Access Control System
Programmable to speed dial up to 250 numbers
Cycles to roll over phone number on busy or no-answer
Program up to 1,000 keyless entry codes
Program up to 1,000 proximity card numbers
Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
Call logging with time and date stamp
Hangs up on busy signal, time-out or touch tone command
Extended temperature range (-40°F to 140°F)
Volume adjustments for microphone and speaker
Selectable auto-answer feature for monitoring
Remotely programmable
Network downloadable firmware
Self diagnostics for testing com, mic, speaker, and switch
Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
Flush mount using the included rough-in box or surface mount using a Viking VE-6×7 Surface Mount Box
Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428

View all features

Add to Pick List Added to Pick List

Software & Downloads

Product Manual

IP Programming Software

K-1775-BN-IP Quick Start Guide

VoIP SIP System Compatibility List

Facebook Tweet Pin LinkedIn Email

Questions?

We are here to help!

Product Details

The K-1775-BN-IP entry system provides quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The vandal resistant speaker phone features a built-in proximity reader and analog color video camera, making it ideal for apartment and residential door entry applications.

The K-1775-BN-IP dials up to 250 programmable numbers and another 250 rollover numbers. It can also read up to 1,000 keyless entry codes and/or proximity card/fob numbers and provide analog CCTV video of who is at your door or gate. For added security, the keyless entry codes and card numbers can be programmed to only allow access at a specific time and/or day of the week. The K-1775-BN-IP can be programmed from any PC on the same LAN or remotely using a static IP address.

When a call initiated by the K-1775-BN-IP entry phone is answered by an apartment or business tenant, a built-in relay contact may be activated to control an electric gate or doorstrike. The K-1775-BN-IP entry phone includes a request for exit (REX) input and also offers activity logging.

The K-1775-BN-IP is designed to be flush mounted using the included rough-in box. Surface mount options are also available using Viking’s VE-6×7 Series Surface Mount Boxes.

For outdoor installations where the unit is exposed to precipitation or condensation, use model K-1775-BN-IPEWP. For more information on Enhanced Weather Protection (EWP), see DOD 859.

Applications

Apartment Entry Phone
Residential Gate Entrance
Door Entry Phone
Courtesy Assistance Phone
Customer Service Phone
Automated Teller (ATM) Phone
Security or Emergency Phone
Hot-Line Phone
Kiosk Phone with up to 250 number speed dialing
Use with any of Viking’s Proximity Cards: PRX-C, PRX-C-ISO or PRX-FOB, see DOD 198

Features

Built-in 125KHz 26-bit Wiegand proximity card reader with LED, beep card read confirmation, and EWP board protection
Compatible with the following Viking Proximity Cards and Fobs: PRX-C, PRX-C-ISO and PRX-FOB (DOD 198)
Built-in high resolution color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature of -30°F to 150°F
Vandal Resistant Features:
- 14 gauge louvered 316 stainless steel faceplate with scratch resistant powder coating
- Stainless steel “Call” button
- Heavy duty metal keypad
- T-10 Torx security mounting screws
Weather Resistant Features:
- Marine grade 316 stainless steel faceplate, screws and push button switch
- Switch internally sealed per IP67
- Mylar speaker
- Self-draining mic mount
- Faceplate, mic and speaker gaskets
Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
Secure Remote Relay Control using Viking RC-4A, see DOD 582
Blue “Call /Status” LED indicator
SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
PoE powered (class 2, <6.5 Watts)
Automatic Noise Canceling (ANC) feature for operation in noisy environments
Viking’s proprietary VOX switching eliminates the need for “Push to Talk” mode
Network downloadable firmware
26 Bit Wiegand input for adding a Viking proximity card reader
26 Bit Wiegand output connect to card reader input of an Access Control System
Programmable to speed dial up to 250 numbers
Cycles to roll over phone number on busy or no-answer
Program up to 1,000 keyless entry codes
Program up to 1,000 proximity card numbers
Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
Call logging with time and date stamp
Hangs up on busy signal, time-out or touch tone command
Extended temperature range (-40°F to 140°F)
Volume adjustments for microphone and speaker
Selectable auto-answer feature for monitoring
Remotely programmable
Network downloadable firmware
Self diagnostics for testing com, mic, speaker, and switch
Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
Flush mount using the included rough-in box or surface mount using a Viking VE-6×7 Surface Mount Box
Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428

Specifications

See Product Manual for complete specifications

Power: PoE class 2 (<6.5 Watts)
Dimensions: Overall: 5.5” x 6.5” x 2.6” (140mm x 165mm x 66mm)
Rough-in box: 4.5” x 5.5” x 2.5” (114mm x 140mm x 64mm)
Shipping Weight: 1.5 kg (3.3 lbs)
Operating Temperature: -30°F to 140°F (-40° C to 60° C)
Humidity: 5% to 95% non-condensing
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Regulatory Compliance: CE, FCC Part 15 and Canada ICES-003 Class A
Connections: (1) RJ45 10/100 Base-T, (14) gel-filled butt connectors