3 Channel Digital Voice Announcer

Model: DVA-1003B

1 minute of record time per channel
Remotely recordable
Locally recordable using a standard carbon handset or tape player
Selectable ring delay per channel
Detects CPC signal and disconnects
Callers may be transferred after the announcement
Messages stored in non-volatile memory, no batteries required
Recording volume LED indicator for consistently high-quality recordings
Recognizes handshake signals from virtually any PABX, Centrex, or CO line
Programmable to repeat announcement
Designed to mount in a standard 19″ rack

View all features

Add to Pick List Added to Pick List

Software & Downloads

Product Manual

DVA Announcements Loaded From a PC

Facebook Tweet Pin LinkedIn Email

Questions?

We are here to help!

Product Details

The DVA-1003B is a professional and cost-effective three port digital voice announcer specifically designed for ACD / UCD, auto-attendant, intercept, night message, and information provider applications, as well as other PABX and Centrex announcement functions.

The DVA-1003B will increase call handling capacity by answering on demand after the programmed ring delay or during the first ring, and automatically adjusting the announce cycle to the message length. The DVA-1003B disconnects on CPC and is instantly ready for the next caller.

The DVA-1003B has 1 minute of non-volatile record time per channel.

Applications

ACD / UCD announcements
Intercept announcement
Announce-only applications
School closings
Ski reports
Night answer
Wake-up calls
Bank rates / commodity prices
Any application where information must be repeated continuously and may require frequent updating
Replace existing tape and drum recorders

Features

1 minute of record time per channel
Remotely recordable
Locally recordable using a standard carbon handset or tape player
Selectable ring delay per channel
Detects CPC signal and disconnects
Callers may be transferred after the announcement
Messages stored in non-volatile memory, no batteries required
Recording volume LED indicator for consistently high-quality recordings
Recognizes handshake signals from virtually any PABX, Centrex, or CO line
Programmable to repeat announcement
Designed to mount in a standard 19″ rack

Certifications

FCC Part 68
FCC Part 15

Specifications

Power: 120VAC / 12VDC 500mA UL listed adapter provided or -24 to -58VDC @ 100mA maximum
Dimensions: 19.0″ x 1.75″ x 5.0″ (483mm x 44mm x 127mm)
Shipping Weight: 7 lbs (3 kg)
Temperature: 32°F to 90°F (0°C to 32°C)
Humidity: 5% to 95% non-condensing
Message Length: 1 minute per channel
Sampling Rate: 64K (equivalent)
Connections: (3) RJ11 jacks, (3) 4-wire E&M jacks, (3) 3.5mm (1/8″) audio jacks, (3) handset jacks, (2) screw terminals

Compare With Similar Items

Power: 120VAC / 12VDC 500mA UL listed adapter provided
Dimensions: 5.25″ x 3.5″ x 1.75″ (133mm x 89mm x 44mm)
Shipping Weight: 2.2 lbs (1.0 kg)
Temperature: 32°F to 90°F (0°C to 32°C)
Humidity: 5% to 95% non-condensing
Frequency Response: 100Hz – 3.4KHz
Sampling Rate: 64K (equivalent)
Maximum Message Length: 7.5 minutes
Recording Audio Input Level: 30mV – 1.0V RMS (AGC range)
Maximum Audio Output Level: 0.3V RMS (across a 600 Ohm load)
Speaker Output Power: 2 Watt peak
Pre-recorded Pacifier Message Length: 30 seconds total
Minimum Speaker Impedance: 2.66 Ohms: (3) 8-Ohm speakers in parallel
Maximum I.O. Com Wire Run Length: 1000 ft on 24 AWG
Maximum Remote Trigger Wire Run Length: 4000 ft on 24 AWG
Connections: (6) cage clamp screw terminals, (3) 3.5mm audio jacks, (1) handset jack

7.5 Minute Digital Voice Announcer

Add To List

Power: 120VAC / 12VDC 500mA UL listed adapter provided
Dimensions: 5″ x 5″ x 1.5″ (127mm x 127mm x 38mm)
Shipping Weight: 2.5lbs (1.13 kg)
Temperature: 32°F to 90°F (0°C to 32°C)
Humidity: 5% to 95% non-condensing
Message Length: Up to 1 minute
Sampling Rate: 64K (equivalent)
Connections: (1) RJ11, (1) 4-wire E&M, (1) 3.5mm audio jack, (1) handset jack

Digital Voice Announcer

Add To List

Power: 120VAC / 12VDC 500mA UL listed adapter provided or -48VDC 100mA maximum
Dimensions: 19″ x 1.75″ x 8″ (483mm x 44mm x 203mm)
Shipping Weight: 7 lbs (3 kg)
Temperature: 32°F to 90°F (0°C to 32°C)
Humidity: 5% to 95% non-condensing
Message Length: 1 minute per channel, field expandable
Sampling Rate: 64K (equivalent)
Interfaces: Standard ring-trip with adjustable ring delay, 4-wire E&M with 600 Ohm audio and switch selectable protocol
Connections: (4) RJ11 jacks, (3) 4-wire E&M jacks, (1) 3.5mm (1/8″) audio jack, (1) handset jack, (8) screw terminals

3 Channel Digital Voice Announcer

Software & Downloads

Questions?

We are here to help!

Product Details

Applications

Features

Certifications

Specifications

Compare With Similar Items

Related Products

Questions?

We are here for you!