IP Emergency Phone Replacement for RAMTEL Applications

Model: E-1600-RTMIPEWP

Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compliant
ASME A17.1 code compliant when used with the Viking model LV-1K Line Verification Panel
Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
PoE powered (class 1, <4 Watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy areas
VoIP eliminates the need for “Push to Talk” mode
Network downloadable firmware
Meets ADA requirements for Emergency Phones:
- Automatically lights the “Call Connected” LED
- Transmits a unique location ID code or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Marine grade 316 stainless steel prevents corrosion
Laser etched graphics
Dials up to 5 emergency numbers
Cycles through backup phone numbers on busy or no-answer
Includes Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating
Hangs up on busy signal, time-out or touch tone command
Extended temperature range (-40°F to 140°F)
Diagnostics for testing microphone, speaker, and relay

View all features

Add to Pick List Added to Pick List

Software & Downloads

Product Manual

Facebook Tweet Pin LinkedIn Email

Questions?

We are here to help!

Product Details

For use with RAMTEL towers, PLC columns, boxes, pedestals, and wall mount enclosures.

The E-1600-RTMIPEWP will call up to 5 programmable emergency numbers, meet ADA requirements for elevator or emergency telephones, and can be programmed from any touch tone phone or PC on the same LAN or remotely using a static IP address. The phones can dial up to 5 programmable emergency numbers. Two amp relay contacts are provided for strobe light, camera, door/gate control, etc.

The E-1600-RTMIPEWP can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF touch tone code may also be delivered. A “Call Connected” LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile memory, requiring no batteries. All units are PoE powered.

The E-1600-RTMIPEWP are equipped with Enhanced Weather Protection (EWP), ideal for outdoor installation where the unit is exposed to precipitation or condensation. EWP products are designed to meet IP66 standards and may feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming. For more information on Enhanced Weather Protection (EWP), click here.

Applications

Replace weather damaged RAMTEL panel phones
Parking ramps/lots
Emergency pool phones
ATM machines
Area of refuge locations
Lobbies
Stairwells in public buildings
Entryways
Campus emergency stations
Roadside emergency stations
Stadiums
Convention centers

Features

Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compliant
ASME A17.1 code compliant when used with the Viking model LV-1K Line Verification Panel
Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
PoE powered (class 1, <4 Watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy areas
VoIP eliminates the need for “Push to Talk” mode
Network downloadable firmware
Meets ADA requirements for Emergency Phones:
- Automatically lights the “Call Connected” LED
- Transmits a unique location ID code or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Marine grade 316 stainless steel prevents corrosion
Laser etched graphics
Dials up to 5 emergency numbers
Cycles through backup phone numbers on busy or no-answer
Includes Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating
Hangs up on busy signal, time-out or touch tone command
Extended temperature range (-40°F to 140°F)
Diagnostics for testing microphone, speaker, and relay

Certifications

EWP
IP66
CE
Canada ICES
FCC Part 15
ADA
SIP

Specifications

Power	PoE class 1 (<4 Watts)
Maximum Sound Pressure	95 dB SPL @ 1m
Operating Temperature	-40°F to 140°F (-40° C to 60° C)
Humidity – EWP Products	Up to 100%
Audio Codecs	G711u, G711a, G722
Network Compliance	IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Regulatory Compliance	CE, FCC Part 15 and Canada ICES-003 Class A
Connections	(1) RJ45 10/100 Base-T, (3) gel-filled butt connectors
Dimensions	6.500” x 8.500” x 2.0” (165 mm x 216mm x 51mm)
Shipping Weight	3.1 lbs (1.41 kg)
Mounting	Flush mount to RAMTEL MINI PLC columns, towers, wall mounts, 926 and 906 boxes and pedestals
Material	14 gauge brushed Marine grade 316 stainless steel
Connections	(1) RJ45 10/100 Base-T, color-coded wires with gel-filled butt connectors

Compare With Similar Items

Power: PoE class 1 (<4 Watts)
Maximum Sound Pressure: 95 dB SPL @ 1m
Operating Temperature: -40°F to 140°F (-40° C to 60° C)
Humidity – EWP Products: Up to 100%
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Regulatory Compliance: CE, FCC Part 15 and Canada ICES-003 Class A
Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors
Dimensions: 8.281” x 11.938” x 2.0” (210 mm x 303mm x 51mm)
Shipping Weight: 3.1 lbs (1.41 kg)
Mounting: Flush mount to RAMTEL PLC columns, towers, wall mounts, 926 and 906 boxes and pedestals
Material: 14 gauge brushed Marine grade 316 stainless steel
Connections: (1) RJ45 10/100 Base-T, color-coded wires with gel-filled butt connectors