Compact VoIP Emergency Phone, Brushed Stainless Finish

Model: E-1600-SS-IP

Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compliant
Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
PoE powered (class 1, <4 Watts)
Automatic Noise Canceling (ANC) for clear audio, even in noisy environments
Meets ADA requirements for Emergency Phones:
- Automatically lights the “Call Connected” LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Handsfree operation
Dials up to 5 emergency numbers
Cycles through backup phone numbers on busy or no-answer
Hangs up on busy signal, time-out or touch tone command
Extended temperature range of -40°F to 140°F
VoIP eliminates the need for “Push to Talk” mode
Network downloadable firmware
Diagnostics for testing microphone, speaker, and relay

View all features

Add to Pick List Added to Pick List

Software & Downloads

Product Manual

IP Programming Software

Facebook Tweet Pin LinkedIn Email

Questions?

We are here to help!

Product Details

The E-1600-SS-IP is an ADA Compliant VoIP Emergency Phone. This compact, low-profile emergency phone is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The phone meets ADA requirements for elevator/emergency telephones, and can be programmed from any touch tone phone or PC on the same LAN or remotely using a static IP address. The phone can dial up to 5 programmable emergency numbers.

The E-1600-SS-IP compact VoIP emergency phone can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF touch tone code may also be delivered. The stainless steel button features an built-in red LED that can be initiated manually or automatically to show “Call Connected”. All programming parameters, including phone numbers and location numbers, are stored in non-volatile memory, requiring no batteries. The unit is PoE powered (class 1, <4 Watts).

For outdoor installations where the unit is exposed to precipitation or condensation, use model E-1600-SS-IPEWP. For more information on Enhanced Weather Protection (EWP), see DOD 859.

Applications

Elevators
Parking ramps/lots
Emergency pool phones
ATM machines
Medical centers
Area of refuge locations
Lobbies
Entryways
Campus emergency stations
Stadiums
Convention centers
Public access areas
Silent hold-up alarm dialer with an optional PB-1 Panic Button Kit (DOD 233)

Features

Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compliant
Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
PoE powered (class 1, <4 Watts)
Automatic Noise Canceling (ANC) for clear audio, even in noisy environments
Meets ADA requirements for Emergency Phones:
- Automatically lights the “Call Connected” LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Handsfree operation
Dials up to 5 emergency numbers
Cycles through backup phone numbers on busy or no-answer
Hangs up on busy signal, time-out or touch tone command
Extended temperature range of -40°F to 140°F
VoIP eliminates the need for “Push to Talk” mode
Network downloadable firmware
Diagnostics for testing microphone, speaker, and relay

Certifications

CE
Canada ICES
FCC Part 15
ADA
SIP

Specifications

Power	PoE class 1 (<4 Watts)
Maximum Sound Pressure	95 dB SPL @ 1m
Dimensions	5.75″ x 3.08″ x 1.05″ (146 mm x 78 mm x 27 mm)
Operating Temperature	-40°F to 140°F (-40° C to 60° C)
Humidity	5% to 95% non-condensing
Shipping Weight	2.5 lbs (1.13 kg)
Material	0.060″ thick (16 gauge) marine grade 316 stainless steel with #4 brushed finish
Mounting	Surface mount to walls, posts, single gang electrical boxes, or recess mount in elevator phone boxes
Audio Codecs	G711u, G711a, G722
Network Compliance	IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Regulatory Compliance	CE, FCC Part 15 and Canada ICES-003 Class A
Connections	(1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

Compare With Similar Items

Power: PoE class 1 (<4 Watts)
Maximum Sound Pressure: 95 dB SPL @ 1m
Dimensions: 5.75″ x 3.08″ x 1.05″ (146 mm x 78 mm x 27 mm)
Operating Temperature: -40°F to 140°F (-40° C to 60° C)
Humidity: 5% to 95% non-condensing
Shipping Weight: 2.5 lbs (1.13 kg)
Material: 0.060″ thick (16 gauge) 304 stainless steel with textured black powder paint
Mounting: Surface mount to walls, posts, single gang electrical boxes, or recess mount in elevator phone boxes
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Regulatory Compliance: CE, FCC Part 15 and Canada ICES-003 Class A
Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

Compact VoIP Emergency Phone, Black Finish

Add To List

Power: PoE class 1 (<4 Watts)
Maximum Sound Pressure: 95 dB SPL @ 1m
Dimensions: 5.75″ x 3.08″ x 1.05″ (146 mm x 78 mm x 27 mm)
Operating Temperature: -40°F to 140°F (-40° C to 60° C)
Humidity: 5% to 95% non-condensing
Shipping Weight: 2.5 lbs (1.13 kg)
Material: 0.060″ thick (16 gauge) 304 stainless steel with textured blue powder paint
Mounting: Surface mount to walls, posts, single gang electrical boxes, or recess mount in elevator phone boxes
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Regulatory Compliance: CE, FCC Part 15 and Canada ICES-003 Class A
Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

Compact VoIP Emergency Phone, Blue Finish