Double Gang Stainless Steel VoIP Entry Phone with EWP

Model: E-32-IP-EWP

2 Amp relay contacts for door / gate or SL-2 Strobe Light (DOD 242) control
Blue “Call Connected” LED indicator
SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 Watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
VoIP audio detection eliminates the need for “Push to Talk” mode
Handsfree operation
T-10 Torx security screws for added security
Laser etched graphics
Programmable to dial up to 5 numbers
Cycles through backup phone numbers on busy or ring-no-answer
Hangs up on busy signal, time-out or touch tone command
Programming software included
Network downloadable firmware
Remotely programmable
Diagnostics for testing mic, speaker, and relay
Flush mounts with a double gang electrical box (not included)
Extended temperature range: -40°F to 140°F (-40°C to 60°C)
Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859

View all features

Add to Pick List Added to Pick List

Software & Downloads

Product Manual

Quick Start Guide

IP Programming Software

Facebook Tweet Pin LinkedIn Email

Questions?

We are here to help!

Product Details

The E-32-IP-EWP VoIP Entry Phone is designed to provide quick and reliable handsfree communication for SIP VoIP entry phone systems with PoE. The E-32-IP-EWP entry phone can be programmed from any touch tone phone, a PC on the same LAN, or remotely using a static IP address. The VoIP entry phone can dial up to 5 programmable numbers.

The E-32-IP-EWP entry phone will flash the “Call” LED during dialing and automatically light the LED when the call is answered. All programming parameters, including phone numbers, are stored in non-volatile memory, requiring no batteries. This VoIP entry phone unit is PoE powered.

For outdoor installations where the unit is exposed to precipitation or condensation, model E-32-IP-EWP is equipped with Enhanced Weather Protection (EWP). EWP products feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards. For more information, see DOD 859.

Applications

Gate Entrance
Parking ramps / lots
ATM machines
Medical centers
Lobbies
Entryways
Stadiums
Convention centers
Public access areas

Features

2 Amp relay contacts for door / gate or SL-2 Strobe Light (DOD 242) control
Blue “Call Connected” LED indicator
SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 Watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
VoIP audio detection eliminates the need for “Push to Talk” mode
Handsfree operation
T-10 Torx security screws for added security
Laser etched graphics
Programmable to dial up to 5 numbers
Cycles through backup phone numbers on busy or ring-no-answer
Hangs up on busy signal, time-out or touch tone command
Programming software included
Network downloadable firmware
Remotely programmable
Diagnostics for testing mic, speaker, and relay
Flush mounts with a double gang electrical box (not included)
Extended temperature range: -40°F to 140°F (-40°C to 60°C)
Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859

Certifications

EWP
IP66
CE
Canada ICES
FCC Part 15
SIP

Specifications

Power: PoE class 1 (<4 Watts)
Maximum Sound Pressure: 90dB SPL @ 1m
Dimensions: 5.0″ x 5.0″ x 2.25″ (127mm x 127mm x 57mm)
Shipping Weight: 2.1 lbs (1.0 kg)
Operating Temperature: -40°F to 140°F (-40°C to 60°C)
Humidity: Up to 100%
Material: 14 gauge 316 stainless steel with #4 brushed finish
SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

Compare With Similar Items

Power: PoE class 1 (<4 Watts)
Maximum Sound Pressure: 90dB SPL @ 1m
Dimensions: 5.0″ x 5.0″ x 2.25″ (127mm x 127mm x 57mm)
Shipping Weight: 2.1 lbs (1.0 kg)
Operating Temperature: -40°F to 140°F (-40°C to 60°C)
Humidity: 5% to 95% non-condensing
Material: 14 gauge 316 stainless steel with #4 brushed finish
SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

Double Gang Stainless Steel VoIP Entry Phone

Add To List

Power: PoE class 1 (<4 Watts)
Maximum Sound Pressure: 90dB SPL @ 1m
Overall Dimensions: 5″ x 5″ x 2.25″ (127mm x 127mm x 57.2mm)
Rough-In Box Dimensions: 4″ x 4″ x 2.15″ (102mm x 102mm x 55mm)
Shipping Weight: 2.12 lbs (1.0 kg)
Operating Temperature: -40°F to 140°F (-40°C to 60°C)
Humidity: 5% to 95% non-condensing
Material: Heavy-duty black powder painted aluminum
SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

IP Entry Phone, Black Finish

Add To List

Power: PoE class 1 (<4 Watts)
Maximum Sound Pressure: 90dB SPL @ 1m
Overall Dimensions: 5″ x 5″ x 2.25″ (127mm x 127mm x 57.2mm)
Rough-In Box Dimensions: 4″ x 4″ x 2.15″ (102mm x 102mm x 55mm)
Shipping Weight: 2.12 lbs (1.0 kg)
Operating Temperature: -40°F to 140°F (-40°C to 60°C)
Humidity: Up to 100%
Material: Heavy-duty black powder painted aluminum
SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors