Double Gang Stainless Steel VoIP Entry Phone with EWP

Model: E-32-IP-EWP

2 Amp relay contacts for door / gate or SL-2 Strobe Light (DOD 242) control
Blue “Call Connected” LED indicator
SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 Watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
VoIP audio detection eliminates the need for “Push to Talk” mode
Handsfree operation
T-10 Torx security screws for added security
Laser etched graphics
Programmable to dial up to 5 numbers
Cycles through backup phone numbers on busy or ring-no-answer
Hangs up on busy signal, time-out or touch tone command
Programming software included
Network downloadable firmware
Remotely programmable
Diagnostics for testing mic, speaker, and relay
Flush mounts with a double gang electrical box (not included)
Extended temperature range: -40°F to 140°F (-40°C to 60°C)
Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859

View all features

Add to Pick List Added to Pick List

Software & Downloads

Product Manual

Quick Start Guide

IP Programming Software

Facebook Tweet Pin LinkedIn Email

Questions?

We are here to help!

Product Details

The E-32-IP-EWP VoIP Entry Phone is designed to provide quick and reliable handsfree communication for SIP VoIP entry phone systems with PoE. The E-32-IP-EWP entry phone can be programmed from any touch tone phone, a PC on the same LAN, or remotely using a static IP address. The VoIP entry phone can dial up to 5 programmable numbers.

The E-32-IP-EWP entry phone will flash the “Call” LED during dialing and automatically light the LED when the call is answered. All programming parameters, including phone numbers, are stored in non-volatile memory, requiring no batteries. This VoIP entry phone unit is PoE powered.

For outdoor installations where the unit is exposed to precipitation or condensation, model E-32-IP-EWP is equipped with Enhanced Weather Protection (EWP). EWP products feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards. For more information, see DOD 859.

Applications

Gate Entrance
Parking ramps / lots
ATM machines
Medical centers
Lobbies
Entryways
Stadiums
Convention centers
Public access areas

Features

2 Amp relay contacts for door / gate or SL-2 Strobe Light (DOD 242) control
Blue “Call Connected” LED indicator
SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 Watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
VoIP audio detection eliminates the need for “Push to Talk” mode
Handsfree operation
T-10 Torx security screws for added security
Laser etched graphics
Programmable to dial up to 5 numbers
Cycles through backup phone numbers on busy or ring-no-answer
Hangs up on busy signal, time-out or touch tone command
Programming software included
Network downloadable firmware
Remotely programmable
Diagnostics for testing mic, speaker, and relay
Flush mounts with a double gang electrical box (not included)
Extended temperature range: -40°F to 140°F (-40°C to 60°C)
Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859

Certifications

EWP
IP66
CE
Canada ICES
FCC Part 15
SIP

Specifications

Power	PoE class 1 (<4 Watts)
Maximum Sound Pressure	90dB SPL @ 1m
Dimensions	5.0″ x 5.0″ x 2.25″ (127mm x 127mm x 57mm)
Shipping Weight	2.1 lbs (1.0 kg)
Operating Temperature	-40°F to 140°F (-40°C to 60°C)
Humidity	Up to 100%
Material	14 gauge 316 stainless steel with #4 brushed finish
SPDT Relay Contact Rating	2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
Audio Codecs	G711u, G711a, G722
Network Compliance	IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Connections	(1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

Compare With Similar Items

Power: PoE class 1 (<4 Watts)
Maximum Sound Pressure: 90dB SPL @ 1m
Dimensions: 5.0″ x 5.0″ x 2.25″ (127mm x 127mm x 57mm)
Shipping Weight: 2.1 lbs (1.0 kg)
Operating Temperature: -40°F to 140°F (-40°C to 60°C)
Humidity: 5% to 95% non-condensing
Material: 14 gauge 316 stainless steel with #4 brushed finish
SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

Double Gang Stainless Steel VoIP Entry Phone

Add To List

Power: PoE class 1 (<4 Watts)
Maximum Sound Pressure: 90dB SPL @ 1m
Overall Dimensions: 5″ x 5″ x 2.25″ (127mm x 127mm x 57.2mm)
Rough-In Box Dimensions: 4″ x 4″ x 2.15″ (102mm x 102mm x 55mm)
Shipping Weight: 2.12 lbs (1.0 kg)
Operating Temperature: -40°F to 140°F (-40°C to 60°C)
Humidity: 5% to 95% non-condensing
Material: Heavy-duty black powder painted aluminum
SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

IP Entry Phone, Black Finish

Add To List

Power: PoE class 1 (<4 Watts)
Maximum Sound Pressure: 90dB SPL @ 1m
Overall Dimensions: 5″ x 5″ x 2.25″ (127mm x 127mm x 57.2mm)
Rough-In Box Dimensions: 4″ x 4″ x 2.15″ (102mm x 102mm x 55mm)
Shipping Weight: 2.12 lbs (1.0 kg)
Operating Temperature: -40°F to 140°F (-40°C to 60°C)
Humidity: Up to 100%
Material: Heavy-duty black powder painted aluminum
SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors