Menu

VoIP Entry Phone System with Camera and Proximity Reader, Brushed Stainless Finish

Model: K-1775-IP

  • Built-in 125KHz 26-bit Wiegand proximity card reader with LED, beep card read confirmation, and EWP board protection
  • Compatible with the following Viking Proximity Cards and Fobs: PRX-C, PRX-C-ISO and PRX-FOB (DOD 198)
  • Built-in high resolution color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature of -30°F to 150°F
  • Vandal Resistant Features:
    • 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics
    • Stainless steel “Call” button
    • Heavy duty metal keypad
    • T-10 Torx security mounting screws
  • Weather Resistant Features:
    • Marine grade 316 stainless steel faceplate, screws and push button switch
    • Switch internally sealed per IP67
    • Mylar speaker
    • Self-draining mic mount
    • Faceplate, mic and speaker gaskets
  • Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
  • Secure Remote Relay Control using Viking RC-4A, see DOD 582
  • Blue “Call /Status” LED indicator
  • SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
  • PoE powered (class 2, <6.5 Watts)
  • Automatic Noise Canceling (ANC) feature for operation in noisy environments
  • Viking’s proprietary VOX switching eliminates the need for “Push to Talk” mode
  • Network downloadable firmware
  • 26 Bit Wiegand input for adding a Viking proximity card reader
  • 26 Bit Wiegand output connect to card reader input of an Access Control System
  • Programmable to speed dial up to 250 numbers
  • Cycles to roll over phone number on busy or no-answer
  • Program up to 1,000 keyless entry codes
  • Program up to 1,000 proximity card numbers
  • Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
  • Call logging with time and date stamp
  • Hangs up on busy signal, time-out or touch tone command
  • Extended temperature range (-40°F to 140°F)
  • Volume adjustments for microphone and speaker
  • Selectable auto-answer feature for monitoring
  • Remotely programmable
  • Network downloadable firmware
  • Self diagnostics for testing com, mic, speaker, and switch
  • Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
  • Flush mount using the included rough-in box or surface mount using a Viking VE-6×7 Surface Mount Box
  • Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428
View all features
Add to Pick List Added to Pick List

Product Details

The K-1775-IP entry phone system provides quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The vandal-resistant speaker phone features a built-in proximity reader and analog color video camera, making it ideal for apartment door entry and residential door entry applications.

The K-1775-IP dials up to 250 programmable phone numbers and another 250 rollover numbers. It can also read up to 1,000 keyless entry codes and/or proximity card/fob numbers and provide analog CCTV video of who is at your door or gate. For added security, the keyless entry codes and card numbers can be programmed to only allow access at a specific time and/or day of the week. The K-1775-IP can be programmed from any PC on the same LAN or remotely using a static IP address.

When a call initiated by the K-1775-IP is answered by an apartment or business tenant, a built-in relay contact may be activated to control an electric gate or doorstrike. The K-1775-IP includes a request for exit (REX) input and also offers activity logging.

The K-1775-IP VoIP entry phone is designed to be flush-mounted using the included rough-in box. Surface mount options are also available using Viking’s VE-6×7 Series Surface Mount Boxes.

For outdoor installations where the unit is exposed to precipitation or condensation, use model K-1775-IP-EWP. For more information on Enhanced Weather Protection (EWP), see DOD 859.

stainless steel voip entry phone with video camera and proximity reader

Applications

  • Apartment Entry Phone
  • Residential Gate Entrance
  • Door Entry Phone
  • Courtesy Assistance Phone
  • Customer Service Phone
  • Automated Teller (ATM) Phone
  • Security or Emergency Phone
  • Hot-Line Phone
  • Kiosk Phone with up to 250 number speed dialing
  • Use with any of Viking’s Proximity Cards: PRX-C, PRX-C-ISO or PRX-FOB, see DOD 198

Features

  • Built-in 125KHz 26-bit Wiegand proximity card reader with LED, beep card read confirmation, and EWP board protection
  • Compatible with the following Viking Proximity Cards and Fobs: PRX-C, PRX-C-ISO and PRX-FOB (DOD 198)
  • Built-in high resolution color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature of -30°F to 150°F
  • Vandal Resistant Features:
    • 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics
    • Stainless steel “Call” button
    • Heavy duty metal keypad
    • T-10 Torx security mounting screws
  • Weather Resistant Features:
    • Marine grade 316 stainless steel faceplate, screws and push button switch
    • Switch internally sealed per IP67
    • Mylar speaker
    • Self-draining mic mount
    • Faceplate, mic and speaker gaskets
  • Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
  • Secure Remote Relay Control using Viking RC-4A, see DOD 582
  • Blue “Call /Status” LED indicator
  • SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
  • PoE powered (class 2, <6.5 Watts)
  • Automatic Noise Canceling (ANC) feature for operation in noisy environments
  • Viking’s proprietary VOX switching eliminates the need for “Push to Talk” mode
  • Network downloadable firmware
  • 26 Bit Wiegand input for adding a Viking proximity card reader
  • 26 Bit Wiegand output connect to card reader input of an Access Control System
  • Programmable to speed dial up to 250 numbers
  • Cycles to roll over phone number on busy or no-answer
  • Program up to 1,000 keyless entry codes
  • Program up to 1,000 proximity card numbers
  • Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
  • Call logging with time and date stamp
  • Hangs up on busy signal, time-out or touch tone command
  • Extended temperature range (-40°F to 140°F)
  • Volume adjustments for microphone and speaker
  • Selectable auto-answer feature for monitoring
  • Remotely programmable
  • Network downloadable firmware
  • Self diagnostics for testing com, mic, speaker, and switch
  • Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
  • Flush mount using the included rough-in box or surface mount using a Viking VE-6×7 Surface Mount Box
  • Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428

Specifications

See Product Manual for complete specifications

  • Power: PoE class 2 (<6.5 Watts)
  • Dimensions: Overall: 5.5” x 6.5” x 2.6” (140mm x 165mm x 66mm)
  • Rough-in box: 4.5” x 5.5” x 2.5” (114mm x 140mm x 64mm)
  • Shipping Weight: 1.5 kg (3.3 lbs)
  • Operating Temperature: -30°F to 140°F (-40° C to 60° C)
  • Humidity: 5% to 95% non-condensing
  • Audio Codecs: G711u, G711a, G722
  • Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
  • Regulatory Compliance: CE, FCC Part 15 and Canada ICES-003 Class A
  • Connections: (1) RJ45 10/100 Base-T, (14) gel-filled butt connectors