SIP / Multicast Paging Adapter with Amplifier

Model: PA-IP

PoE powered (class 3, <13 Watts)
Paging prioritization
Plays audio from multicast
SIP endpoint or multicast group member
Supports up to 10 multicast paging groups
Red “Page / Status” LED indicator
SIP compliant (see product manual for list of compatible IP-PBX phone systems)
Network downloadable firmware
Autoprovisioning via Viking programming software
Built-in high efficiency 6 watt class D amplifier
Relay for activating door locks, strobe lights, external amplifiers, etc.
SIP / Multicast: SIP page, SIP page and zoned multicast stream, zoned Multicast receive
Support for access code to prevent unwanted SIP calls
Line-level audio output for connecting to an external amplifier
Network remote volume control
Can drive up to 6 external analog 8 Ohm speakers
Diagnostics (for testing the relay)

View all features

Add to Pick List Added to Pick List

Software & Downloads

Product Manual

Quick Start Guide

IP Programming Software

VoIP SIP System Compatibility List

Facebook Tweet Pin LinkedIn Email

Questions?

We are here to help!

Product Details

The Viking model PA-IP SIP / Multicast Paging Adapter provides an interface between new VoIP phone systems (hardware or hosted / cloud based) and analog paging systems, eliminating the need for an ATA or FXS port. The PA-IP can be used for standard SIP endpoint paging or multicast paging and background music.

The unit easily connects with a single CAT5/6 cable from your PoE switch. An auxiliary trigger input allows an optional hard wired switch or phone system trigger output to enable loud ringing / night bell from after hour incoming calls. Line-level audio output connections are provided for connecting to an external amplifier.

A built-in 6 Watt class D amplifier with speaker output connections is also provided to drive up to 6 analog 8 Ohm speakers. A programmable relay output is provided for triggering external amplifiers, etc.

Applications

Amplified SIP endpoint or multicast IP paging for:
- Schools
- Hospitals
- Retail stores
- Office spaces, etc.
Provide background music and sound masking
IP phone system integration with traditional analog amplifier (e.g. single zone voice paging)

Features

PoE powered (class 3, <13 Watts)
Paging prioritization
Plays audio from multicast
SIP endpoint or multicast group member
Supports up to 10 multicast paging groups
Red “Page / Status” LED indicator
SIP compliant (see product manual for list of compatible IP-PBX phone systems)
Network downloadable firmware
Autoprovisioning via Viking programming software
Built-in high efficiency 6 watt class D amplifier
Relay for activating door locks, strobe lights, external amplifiers, etc.
SIP / Multicast: SIP page, SIP page and zoned multicast stream, zoned Multicast receive
Support for access code to prevent unwanted SIP calls
Line-level audio output for connecting to an external amplifier
Network remote volume control
Can drive up to 6 external analog 8 Ohm speakers
Diagnostics (for testing the relay)

Certifications

CE
FCC Part 15
SIP

Specifications

Power: PoE class 3 (<13 Watts)
Dimensions: 5″ x 5.25″ x 1.5″ (127mm x 133mm x 38mm)
Shipping Weight: 1.0 lbs (0.45 kg)
Operating Temperature: -40°F to 140°F (-40°C to 60°C)
Humidity: 5% to 95% non-condensing
Audio Codecs: G711u, G722, and G711a (SIP only)
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Maximum Output Level driving one Viking 40AE Speaker: 105 dB SPL @ 1M
Amplifier: 6 Watt class D (capable of driving up to six 8 Ohm speakers connected in parallel)
Connections: (1) RJ45 10/100 Base-T, (8) cage clamp screw terminals on pluggable connector

Tones

Tone	Description	Download
Normal Ring	Normal Ring Cadence	N/A
Double Ring	Double Ring Cadence	N/A
Short Short Long	Short Short Long Ring Cadence	N/A
Short Long Short	Short Long Short Ring Cadence	N/A
One Beep	One Beep	N/A
Two Beeps	Two Beeps	N/A
Three Beeps	Three Beeps	N/A

Compare With Similar Items

Power: PoE class 3 (<13 Watts)
Overall Dimensions: 11″ x 11″ x 4″ (279mm x 279mm x 102mm)
Back Box Dimensions: 9.25″ x 9.25″ x 3.45″ (235mm x 235mm x 88mm)
Shipping Weight: 5.0 lbs (2.27 kg)
Operating Temperature: -40°F to 140°F (-40°C to 60°C)
Humidity: 5% to 95% non-condensing
Audio Codecs: G711u, G722, and G711a (SIP only)
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Maximum Output Level: 105 dB SPL @ 1M (with no additional speakers connected)
Amplifier: 6 Watt class D (capable of driving up to five additional 8 Ohm speakers connected in parallel)
Connections: (1) RJ45 10/100 Base-T, (4) cage clamp screw terminals on pluggable connector

SIP / Multicast Ceiling Speaker

Add To List

Power: PoE class 3 (<13 Watts)
Overall Dimensions: 11″ x 11″ x 4″ (279mm x 279mm x 102mm)
Back Box Dimensions: 9.25″ x 9.25″ x 3.45″ (235mm x 235mm x 88mm)
Shipping Weight: 5.0 lbs (2.27 kg)
Operating Temperature: -40°F to 140°F (-40°C to 60°C)
Humidity: 5% to 95% non-condensing
Audio Codecs: G711u, G722, and G711a (SIP only)
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Sensitivity: 96dB / 1W / 1M SPL
Maximum Output Level: 105 dB SPL @ 1M (with no additional speakers connected)
Amplifier: 6 Watt class D (capable of driving up to five additional 8 Ohm speakers connected in parallel)
Connections: (1) RJ45 10/100 Base-T, (8) cage clamp screw terminals on pluggable connector

overhead SIP ceiling speaker with talkback multicast

SIP / Multicast Talk-Back Ceiling Speaker