Menu

Hot-Line Panel Phone with Enhanced Weather Protection

Model: K-1900-8-EWP

  • Vandal Resistant Features:
    • 12 gauge (0.105″ thick) 316 stainless steel panel with permanent laser etched graphics
    • Armored handset cable
    • Metal cradle
    • Heavy duty metal keypad
    • Hex drive mounting screws
  • Weather Resistant Features:
    • Marine grade 316 stainless steel faceplate
    • Marine grade 316 stainless steel screws
    • Internally sealed keypad
    • Gaskets (on EWP models)
    • Equipped with Enhanced Weather Protection (EWP)
  • Auto dials one programmable speed dial number (up to 32 digits)
  • Multi-number dialer mode adds 5 speed dial numbers (up to 16 digits)
  • Touch tone or pulse dialing
  • Non-volatile memory, no batteries required
  • Operates on analog PABX and key system extensions or analog Centrex and CO lines
  • Programmable 6 digit security code
  • Touch tone programmable
  • Armored 54″ handset cable
  • Programmable pre-dial pause
  • Blocks fraudulent calls from hand held pocket dialers
  • Limited toll restriction in standard touch tone phone mode
  • Hearing aid compatible amplified handset with sealed push button volume control
  • Programmable default volume level
  • Programmable volume control disable
  • Equipped with Enhanced Weather Protection (EWP) – EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
  • Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
  • Flush mount using the included rough-in box or surface mount using a Viking VE-5×10 surface mount box (not included, DOD 424)
View all features
Add to Pick List Added to Pick List
Software & Downloads

Product Manual

Product Details

The K-1900-8-EWP panel hot-line phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard (dumb) phone. The hot-line phone unit will touch tone or pulse dial and will not auto-dial on incoming calls.

The K-1900-8-EWP housing consists of a heavy gauge stainless steel panel, a metal touch tone keypad, an armored cable, a heavy duty handset, and an all metal cradle. The stainless steel K-1900-8-EWP can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory.

The K-1900-8-EWP hot-line phone shares all of the features of the K-1900-8 in addition to Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or condensation. EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming. For more information, see DOD# 859.

stainless steel panel hot-line phone with armored cable and steel keypad

Applications

  • Catalog sales
  • Kiosks
  • Courtesy and customer service phones
  • Automated tellers (ATMs)
  • Hot-Line reservation phones
  • Security and emergency phones
  • Replaces leased ringdown circuits
  • Gate / entrance communication in noisy locations (diesel trucks, factory noise, etc.)

Features

  • Vandal Resistant Features:
    • 12 gauge (0.105″ thick) 316 stainless steel panel with permanent laser etched graphics
    • Armored handset cable
    • Metal cradle
    • Heavy duty metal keypad
    • Hex drive mounting screws
  • Weather Resistant Features:
    • Marine grade 316 stainless steel faceplate
    • Marine grade 316 stainless steel screws
    • Internally sealed keypad
    • Gaskets (on EWP models)
    • Equipped with Enhanced Weather Protection (EWP)
  • Auto dials one programmable speed dial number (up to 32 digits)
  • Multi-number dialer mode adds 5 speed dial numbers (up to 16 digits)
  • Touch tone or pulse dialing
  • Non-volatile memory, no batteries required
  • Operates on analog PABX and key system extensions or analog Centrex and CO lines
  • Programmable 6 digit security code
  • Touch tone programmable
  • Armored 54″ handset cable
  • Programmable pre-dial pause
  • Blocks fraudulent calls from hand held pocket dialers
  • Limited toll restriction in standard touch tone phone mode
  • Hearing aid compatible amplified handset with sealed push button volume control
  • Programmable default volume level
  • Programmable volume control disable
  • Equipped with Enhanced Weather Protection (EWP) – EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
  • Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
  • Flush mount using the included rough-in box or surface mount using a Viking VE-5×10 surface mount box (not included, DOD 424)

Specifications

  • Power: Telephone line powered (20V DC/18mA minimum)
  • Dimensions for EWP Model
    • Phone: 5.0” x 10.0” x 4.93” (127mm x 254mm x 125mm)
    • With rough-in box: 5.0” x 10.0” x 5.61” (127mm x 254mm x 143mm)
  • Shipping Weight: 5 lbs (2.3 kg )
  • Operating Temperature: -30°F to 140°F (-34°C to 60°C)
  • Humidity – EWP Model: Up to 100% condensing
  • Handset Cable Length: 52” to 57” (132 cm to 145 cm)
  • Touch Tone Dial Speed: Normal = 120ms on/off, Fast = 50ms on/off
  • Pulse Dial Speed: Normal = 10 pps, Fast = 20 pps
  • Connections: (2) gel-filled butt connectors

Compare With Similar Items

  • Power: Telephone line powered (20VDC / 18mA)
  • Phone Dimensions: 5.0″ x 10.0″ x 4.54″ (127mm x 254mm x 113mm)
  • Overall Dimensions: 5.0″ x 10.0″ x 5.53″ (127mm x 254mm x 141mm)
  • Shipping Weight: 4 lbs (1.8 kg)
  • Operating Temperature: -30°F to 140°F (-34°C to 60°C)
  • Humidity: 5% to 95% non-condensing
  • Panel Material: 0.105″ thick stainless steel
  • Handset Cable Length: 34″ to 37″ (86cm to 94cm)
  • Touch Tone Dial Speed: Normal – 120ms on / off, Fast – 50ms on / off
  • Pulse Dial Speed: Normal – 10pps, Fast – 20pps
  • Connections: (2) gel-filled butt connectors
  • Power: Telephone line powered (20V DC/18mA minimum)
  • Dimensions for Standard Model
    • Phone : 5.0” x 10.0” x 4.54” (127mm x 254mm x 113mm)
    • With rough-in box: 5.0” x 10.0” x 5.53” (127mm x 254mm x 141mm)
  • Shipping Weight: 5 lbs (2.3 kg )
  • Operating Temperature: -30°F to 140°F (-34°C to 60°C)
  • Humidity – Standard Model: 5% to 95% non-condensing
  • Handset Cable Length: 12” to 12.7” (31 cm to 33 cm)
  • Touch Tone Dial Speed: Normal = 120ms on/off, Fast = 50ms on/off
  • Pulse Dial Speed: Normal = 10 pps, Fast = 20 pps
  • Connections: (2) gel-filled butt connectors
  • Power: Telephone line powered (20V DC/18mA minimum)
  • Dimensions for Standard Model
    • Phone : 5.0” x 10.0” x 4.54” (127mm x 254mm x 113mm)
    • With rough-in box: 5.0” x 10.0” x 5.53” (127mm x 254mm x 141mm)
  • Shipping Weight: 5 lbs (2.3 kg )
  • Operating Temperature: -30°F to 140°F (-34°C to 60°C)
  • Humidity – Standard Model: 5% to 95% non-condensing
  • Handset Cable Length: 12” to 12.7” (31 cm to 33 cm)
  • Touch Tone Dial Speed: Normal = 120ms on/off, Fast = 50ms on/off
  • Pulse Dial Speed: Normal = 10 pps, Fast = 20 pps
  • Connections: (2) gel-filled butt connectors