Hot-Line Panel Phone with 12" Armored Cable, Lanyard, and Keypad

Model: K-1900-812L

Vandal Resistant Features:
- 12 gauge (0.105″ thick) 316 stainless steel panel with permanent laser etched graphics
- Armored handset cable
- Metal cradle
- Heavy duty metal keypad
- Hex drive mounting screws
Weather Resistant Features:
- Marine grade 316 stainless steel faceplate
- Marine grade 316 stainless steel screws
- Internally sealed keypad
Auto dials one programmable speed dial number (up to 32 digits)
Multi-number dialer mode adds 5 speed dial numbers (up to 16 digits)
Touch tone or pulse dialing
Non-volatile memory, no batteries required
Operates on analog PABX and key system extensions or analog Centrex and CO lines
Programmable 6 digit security code
Touch tone programmable
Armored 12″ handset cable with an internal stainless steel lanyard for additional cable strength
Programmable pre-dial pause
Blocks fraudulent calls from hand held pocket dialers
Limited toll restriction in standard touch tone phone mode
Hearing aid compatible amplified handset with sealed push button volume control
Programmable default volume level
Programmable volume control disable
Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
Flush mount using the included rough-in box or surface mount using a Viking VE-5×10 surface mount box (not included, DOD 424)

View all features

Add to Pick List Added to Pick List

Software & Downloads

Product Manual

Facebook0 Tweet0 Pin0 LinkedIn0 Email0

Product Details

The K-1900-812L hot-line panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard touch tone phone. The hot-line unit will touch tone or pulse dial and will not auto-dial on incoming calls.

The K-1900-812L hot-line phone features a 12″ armored cable with an internal stainless steel lanyard for increased strength and vandal resistance. The phone housing consists of a heavy gauge stainless steel panel, metal touch tone keypad, armored cable, heavy duty handset, and all metal cradle. The K-1900-812L hot-line panel phone can be easily touch tone programmed at the shop or installation site. All programming is stored in non-volatile memory.

For outdoor installations where the unit is exposed to precipitation or condensation, use model K-1900-812L-EWP. For more information on Enhanced Weather Protection (EWP), see DOD 859.

Applications

Catalog sales
Kiosks
Courtesy and customer service phones
Automated tellers (ATMs)
Hot-Line reservation phones
Security and emergency phones
Replaces leased ringdown circuits
Gate / entrance communication in noisy locations (diesel trucks, factory noise, etc.)

Features

Vandal Resistant Features:
- 12 gauge (0.105″ thick) 316 stainless steel panel with permanent laser etched graphics
- Armored handset cable
- Metal cradle
- Heavy duty metal keypad
- Hex drive mounting screws
Weather Resistant Features:
- Marine grade 316 stainless steel faceplate
- Marine grade 316 stainless steel screws
- Internally sealed keypad
Auto dials one programmable speed dial number (up to 32 digits)
Multi-number dialer mode adds 5 speed dial numbers (up to 16 digits)
Touch tone or pulse dialing
Non-volatile memory, no batteries required
Operates on analog PABX and key system extensions or analog Centrex and CO lines
Programmable 6 digit security code
Touch tone programmable
Armored 12″ handset cable with an internal stainless steel lanyard for additional cable strength
Programmable pre-dial pause
Blocks fraudulent calls from hand held pocket dialers
Limited toll restriction in standard touch tone phone mode
Hearing aid compatible amplified handset with sealed push button volume control
Programmable default volume level
Programmable volume control disable
Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
Flush mount using the included rough-in box or surface mount using a Viking VE-5×10 surface mount box (not included, DOD 424)

Certifications

FCC Part 68
FCC Part 15

Specifications

Power: Telephone line powered (20V DC/18mA minimum)
Dimensions for Standard Model
- Phone : 5.0” x 10.0” x 4.54” (127mm x 254mm x 113mm)
- With rough-in box: 5.0” x 10.0” x 5.53” (127mm x 254mm x 141mm)
Shipping Weight: 5 lbs (2.3 kg )
Operating Temperature: -30°F to 140°F (-34°C to 60°C)
Humidity – Standard Model: 5% to 95% non-condensing
Handset Cable Length: 12” to 12.7” (31 cm to 33 cm)
Touch Tone Dial Speed: Normal = 120ms on/off, Fast = 50ms on/off
Pulse Dial Speed: Normal = 10 pps, Fast = 20 pps
Connections: (2) gel-filled butt connectors

Compare With Similar Items

stainless steel hotline panel phone with armored cable and steel keypad

Power: Telephone line powered (20VDC / 18mA)
Phone Dimensions: 5.0″ x 10.0″ x 4.54″ (127mm x 254mm x 113mm)
Overall Dimensions: 5.0″ x 10.0″ x 5.53″ (127mm x 254mm x 141mm)
Shipping Weight: 4 lbs (1.8 kg)
Operating Temperature: -30°F to 140°F (-34°C to 60°C)
Humidity: 5% to 95% non-condensing
Panel Material: 0.105″ thick stainless steel
Handset Cable Length: 34″ to 37″ (86cm to 94cm)
Touch Tone Dial Speed: Normal – 120ms on / off, Fast – 50ms on / off
Pulse Dial Speed: Normal – 10pps, Fast – 20pps
Connections: (2) gel-filled butt connectors